Full-surface induction hob cx492101, 400 series

One large cooking surface

Free placement of cookware

All sizes and formats of cookware can be used

Intuitive control of all functions via TFT touch display

Cooking sensor function for temperature control in pots and pans

Further details

One large cooking surface

Free placement of cookware

All sizes and formats of cookware can be used

Intuitive control of all functions via TFT touch display

Cooking sensor function for temperature control in pots and pans

Professional cooking functions

Max. Power for large cookware of up to 5.5 kW

Frameless for flush installation

Cooking zones

A single cooking surface of 3200 cm².

Simultaneous use of max.6 cookware on the cooktop possible.

Operation

User-friendly color TFT touch display with operating instructions.

Electronic control in 17 power levels.

Equipment

Cooking sensor function.

Professional cooking function.

Dynamic cooking function.

Teppan Yaki function.

Booster function pots.

Booster function for pans.

Keep warm function.

Individual pot recognition.

Automatic cooking time for each cooking zone.

Stopwatch.

Short-time alarm.

Info button with operating instructions.

Energy management.

Cooktop-based ventilation control (with matching hood).

Home network integration for digital services (Home Connect) wirelessly via WiFi.

The use of the Home Connect function depends on the Home Connect services, which are not available in every country. For more information, visit home-connect.com.

Security

Main switch.

Residual heat indicator.

Child lock.

Safety shutdown.

Pause function.

Planning information

Only suitable for iron-magnetic cookware. For optimal temperature distribution, cookware with sandwich bottom is recommended.

The wok pan wp 400 001 cannot be used on this appliance.

Installation is suitable in countertops made of stone, synthetic material or solid wood. Heat resistance and waterproof sealing of cut edges must be considered. For other materials, consult with the countertop manufacturer regarding use.

The load-bearing capacity and stability, especially with thin worktops, must be ensured by suitable substructures. Take into account the weight of the unit including additional load.

The groove must be continuous and even to ensure even support of the equipment on the seal. Do not use spot relining.

Device must be fastened from below.

The joint width may vary due to dimensional tolerances of the glass ceramic panel and the worktop cut-out.

Weight of appliance: approx. 31 kg.

Connection data

Total connected load 7.4 kW.

Connection cable 1.5 m without plug.

Power standby/display off 0.5 W.

Power standby/network 2.0 W.

Please follow the instructions in the user manual if you want to switch off the WiFi function.